Toward the generation of EPOS-GNSS products - IRD - Institut de recherche pour le développement Accéder directement au contenu
Poster De Conférence Année : 2018

Toward the generation of EPOS-GNSS products

Vers la génération des produits EPOS-GNSS

Aline Déprez
Anne Socquet
Andrea Walpersdorf
  • Fonction : Auteur
  • PersonId : 848188

Résumé

In the framework of EPOS (EPOS - European Plate Observing System) project implementation phase, an analysis center is hosted in France at Université Grenoble Alpes – CNRS. Within the work package WP10, GNSS data and product, UGA-CNRS is responsible for providing products (position time series and velocity field) generated by a processing using double difference method (via GAMIT/GLOBK software). For this purpose, we developed strategies to take up the up-scaling challenge and generate from a big data set the usual GNSS products. For computational efficiency, the massive data set was split into sub-networks and the GAMIT software launched for each sub-network independently, following the same approach than the one presented in the framework of the PBO project. The informatics resources at our disposal are composed of a management tool for batch processing on computing environments (CiGri) and an open source data management software (IRODS), installed on the high performance computer available at UGA (CIMENT). Concerning the velocity field computation, we used MIDAS software. A few different tests were performed in order to check the reliability of our solution and to determine the best way to proceed. We also take advantage of the human and computational resources available in order to include in our solution some no-EPOS stations and generate: - An exhaustive solution in France, including stations from Rénag, RGP and Orpheon. Such dense solution was never performed before using DD method. - A solution in Greece including data from the SMARTNET network. Our solution includes more than 1500 stations constituting a widespread pan-European network, over an 18-years time span [2000-2017].
Dans le cadre de la phase de mise en œuvre du projet EPOS (EPOS - European Plate Observing System), un centre d'analyse est hébergé en France à l'Université Grenoble Alpes - CNRS. Dans le cadre du work package WP10, données GNSS et produit, UGA-CNRS est responsable de la fourniture des produits (séries temporelles de position et champ de vitesse) générés par un traitement utilisant la méthode des doubles différences (via le logiciel GAMIT/GLOBK). Pour ce faire, nous avons développé des stratégies pour relever le défi de la mise à l'échelle et générer à partir d'un grand ensemble de données les produits GNSS habituels. Par souci d'efficacité informatique, l'énorme ensemble de données a été divisé en sous-réseaux et le logiciel GAMIT a été lancé indépendamment pour chaque sous-réseau, suivant la même approche que celle présentée dans le cadre du projet PBO. Les moyens informatiques à notre disposition sont composés d'un outil de gestion des traitements batch sur environnements informatiques (CiGri) et d'un logiciel de gestion de données open source (IRODS), installés sur l'ordinateur haute performance disponible chez UGA (CIMENT). En ce qui concerne le calcul du champ de vitesse, nous avons utilisé le logiciel MIDAS. Quelques tests différents ont été effectués afin de vérifier la fiabilité de notre solution et de déterminer la meilleure façon de procéder. Nous profitons également des ressources humaines et informatiques disponibles afin d'inclure dans notre solution des stations sans EPOS et de générer : - Une solution exhaustive en France, incluant les stations de Rénag, RGP et Orphéon. Une telle solution dense n'a jamais été réalisée avant l'utilisation de la méthode DD. - Une solution en Grèce incluant les données du réseau SMARTNET. Notre solution comprend plus de 1500 stations constituant un réseau paneuropéen étendu, sur une période de 18 ans (2000-2017).
Fichier principal
Vignette du fichier
poster_wegener_grenoble18.pdf (5.26 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-01958416 , version 1 (09-01-2019)

Licence

Paternité

Identifiants

  • HAL Id : hal-01958416 , version 1

Citer

Aline Déprez, Anne Socquet, Nathalie Cotte, Andrea Walpersdorf. Toward the generation of EPOS-GNSS products: Massive GNSS processing and evaluation of a statistical approach for the velocity field computation. 19th General Assembly of WEGENER : on Earth deformation & the study of earthquakes using geodesy and geodynamics, Sep 2018, Grenoble, France. , 2018. ⟨hal-01958416⟩
172 Consultations
56 Téléchargements

Partager

Gmail Facebook X LinkedIn More