P. A. Kohl, Q. Zhao, K. Patel, D. Schmidt, A. S. Shick et al., Air-Gaps for Electrical Interconnections, Electrochemical and Solid-State Letters, vol.1, issue.1, pp.49-51, 1998.
DOI : 10.1149/1.1390631

A. Treizebré and B. Bocquet, Nanometric metal wire as a guide for THz investigation of living cells, International Journal of Nanotechnology, vol.5, issue.6/7/8, p.5, 2008.
DOI : 10.1504/IJNT.2008.018697

V. K. Dwivedi, R. Gopal, and S. Ahmad, Fabrication of very smooth walls and bottoms of silicon microchannels for heat dissipation of semiconductor devices Microelectron, J, vol.318, pp.405-410, 2000.

J. P. Jayachandran, H. A. Reed, H. Zhen, L. F. Rhodes, C. L. Henderson et al., Air-Channel Fabrication for Microelectromechanical Systems via Sacrificial Photosensitive Polycarbonates IEEE Hot filament chemical vapor deposition of polyoxymethylene as a sacrificial layer for fabricating air gaps Electrochem. Solid-State Lett, Fabrication of air-channel structures for microfluidic, microelectromechanical, and microelectronic applications IEEE J. MEMS, pp.147-159, 2001.

H. Noha, Y. Choib, C. Wu, P. J. Heskethaand, M. Allen et al., Rapid, low-cost fabrication of parylene microchannels for microfluidic applications The 12th International Conference on Solid State Sensors, Actuators and Microsystems, Parviz B A, Whitesides G M 2005 Water-Soluble Sacrificial Layers for Surface Micromachining Small, pp.150-205, 2003.

A. Bagolini, L. Pakula, T. Scholtes, H. Pham, P. J. French et al., A low-temperature IC-compatible process for fabricating surfacemicromachined metallic microchannels Polyimide sacrificial layer and novel materials for post-processing surface micromachining, IEEE J. MEMS J. Micromech. Microeng, vol.723, issue.12, pp.267-273, 2002.

S. Tsai, M. Loughran, A. Hiratsuka, K. Yano, I. Karube et al., Application of plasma-polymerized films for isoelectric focusing of proteins in a capillary electrophoresis chip Analyst 128 237?244 [24] Muguruma H, Karube I 1999 Plasma-polymerized films for biosensors TrAC Characterization of organosilicon films synthesized by N2-PACVD. Application to fire retardant properties of coated polymers Surf, Trends Anal. Chem. Coat. Technol, vol.182526, issue.180, pp.62-68, 2003.

G. R. Facer, D. A. Notterman, and L. Sohn, Growth and Modification of Organosilicon Films in PECVD and remote Afterglow Reactors Plasma Process Dielectric spectroscopy for bioanalysis: From 40 Hz to 26.5 GHz in a microfabricated wave guide Appl, Polym. Phys. Lett, vol.32728, issue.78, pp.100-109, 2001.

B. Bocquet, N. Bourzgui, Y. Guhel, V. Mille, C. Vivien et al., New technology for high throughput THz BioMEMS, Proc. of the 28th IEEE-EMBS International Conference Design Of Silicon-PPTMDS Bio-MEMS By Cold RPECVD Proc. Of SPIE Microfluidics, pp.3505-3508, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00243997

V. Conédéra, L. Goff, B. Fabre, and N. Khan-malek, Potentialities of a new positive photoresist for the realization of thick moulds Hydrophilization and hydrophobic recovery of PDMS by oxygen plasma and chemical treatment?An SEM investigation, J. Micromech. Microeng. Sens. Actuators, B: Chemical, vol.932, issue.123, pp.173-175, 1999.

E. W. Simoes, S. G. De-souza, M. Da-silva, R. Furlan, and H. Peres, Study of preconcentration of non-polar compounds in microchannels with constrictions Sens, Marching velocity of capillary meniscuses in microchannels The Fifteenth IEEE International Conference on Micro Electro Mechanical Systems, pp.93-96, 2006.